Description
Price - £195.00 + VAT
This is the Russell Engineering RE13PP cam developed for optimum street-sports use.
Lumpy idle, pulls from 2,500rpm clean through to 7,500rpm+.
With the right cylinder head and induction system this cam will give blistering street performance and very competitive hill-climb/track day/ sprint performance. Recommended compression ratio for this cam is 10.5:1.
1.4:1 rockers are recommended to maximise potential.
Make sure good quality valve springs with at least 200lb in nominal rate are used.
To avoid premature wear, I very strongly advise, to the point of insistence, that you use the cam followers sold on this site (CST3024 standard type, CST3025 race type) as they have had the face re-profiled to give them the essential correct shape absent from the vast majority of followers on the market.
Never use used cam followers unless it is on the cam they came from and where position numbered.
All cams have A+-type slot drive for oil pump.
Ground on new cross-drilled cam blanks.
Comes with cam installation instructions.